碘分子的荧光谱和激发光谱的测量和研究

观察到碘分子在光谱线514.5nm感应作用下的荧光谱,同时得到了在514.5nm附近碘分子的激发光谱。这两种谱的测量和研究表明,两能极模型对碘分子是一个很好的近似,普通光感应的碘分子荧光谱明显不同于激光感应的碘分子荧光谱。 在上面测量和研究的基础上,建立了新的物理模型以应用到激光感应荧光测量技术中。在488.0～544.0nm间,观察到了碘分子的激光感应荧光。     

推力矢量和二元喷管

推力矢量是第四代战斗机获得过失速机动性的必要条件,而二元喷管又是推力矢量控制中性能较为优越的一类喷管。本文较全面地阐述了目前世界上推力矢量和二元喷管的发展和现况、二元喷管的构造和性能、二元喷管对改进飞机升阻特性和机动的作用。推力矢量能显著提高飞机在空战中的作战效率以及推力矢量控制所需的效能也在文中作了介绍。     

超精密微牛级微波离子推进技术及其在卫星超精度控制中的应用研究

空间技术的快速发展使得利用空间卫星的编队飞行构建大型空间星座成为可能，在引力波探测、射电望远镜编队、星座组网等任务方面具有重要作用。超精度控制是实现卫星高精度编队飞行的关键技术。推进系统是实现卫星编队长期高度稳定飞行的保证，从而实现内部科学装置的正确运行。不同于常规的推进系统，卫星精密编队超精度控制对推进系统的推力可调范围、分辨率、响应时间、推力的一致性等有着极高的要求。根据卫星精密编队任务需求，对微牛级推进系统的功能及技术要求进行了分析，提出了基于M2微波离子推力器的卫星超精度控制推进系统。阐述了M2超精密微牛级推进系统的关键技术和研究进展，为后续M2推力器在无拖曳控制方面的应用奠定了基础。     

基于改进灰狼优化算法的涡扇发动机性能/喷流噪声综合优化控制研究

为保证整个飞行过程中满足噪声适航标准和飞行器的安全性,需要按照最严苛的噪声要求进行发动机设计,并留有很大的安全裕度,因而导致发动机的性能潜力未能得到发挥。本文对传统灰狼算法进行了改进,提出自适应概率变异策略,在优化过程中调整狩猎模式,提升了算法的全局搜索能力;基于该算法开展涡扇发动机性能/喷流噪声综合寻优控制研究,根据不同飞行需求对航空发动机性能进行优化,获得最佳控制量,在满足安全性和噪声指标的同时,提高发动机的性能。仿真结果表明,改进后的算法具有更好的全局寻优性能,最大推力模式下可提升推力13.45%,最小油耗模式可降低油耗3.19%,最低涡轮前温度模式可降低涡轮前温度2.07%。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

基于激光的便携式飞机装配接缝质量检测仪及应用

介绍了一种基于激光的便携式接缝质量检测仪的工作原理及硬件组成。使用该检测仪对飞机缝隙和台阶阶差进行了测量,通过与人工测量进行对比验证,证明了该装置可实现对特征三维信息的快速自动检测,工作准确可靠。     

白天激光漫反射测距中微弱信号检测的单开门多触发方法

白天激光漫反射测距因存在强背景噪声,导致微弱回波信号的检测十分困难,严重限制了激光漫反射测距的广泛应用。因此,提出了采用单开门多触发方法解决白天激光漫反射测距的微弱信号检测难题。首先,介绍了一种GM-APD (Geiger-ModeAvalanchePhotoDiode,盖革模式雪崩光电二极管)多触发概率分布函数的快速求解方法。接着,取激光漫反射测距系统典型参数,理论分析了多触发情况下的回波信号检测概率,分析结果表明单开门多触发方法可提高激光漫反射测距在白天情况下的回波信号检测概率。同时,通过对触发次数限制的优选,可以增加有效检测比,减少白天观测条件下回波信号的提取代价。最终,通过系统仿真验证了理论分析结果的正确性。因此,单开门多触发方法是解决白天激光漫反射测距微弱信号检测的可行途径之一。